
"Viewmaster" Style Wheel Card
Level: Intermediate
This card is similiar to the viewmaster. You rotate the
circle inside the card and view different images. I also stamped
coordinating words with the images.

Supplies:
Cardstock: Club Scrap
Rubberstamps: Club Scrap
Inks: Ranger Industries
Circle cutter: CM
Scissors
Pencil
Eraser
Instructions:
- Cut a piece of blue cardstock 8.5x5.25 inches.
Fold in half lengthwise.
- Cut a 5/8 inch tab out of the 5.25 inch
side of both front and back covers.
- Cut a 4 in circle from light gray cardstock.
- Place circle inside card and center.
Poke a hole in the center of both sides of the folded card and the
circle.
- Cut
or punch a square about ¼ inch
from hole centering on the top half of the card front.
Mat an additional smaller square behind the first square.
- Place circle inside card and mark the location of the tab and the square
with a pencil lightly.
- Remove
circle, stamp images. Reinsert
circle, turn so that images are not visible, repeat marking with pencil,
stamping images. Repeat until you have as many images as will fit in your
circle. My circle held three images.
- Erase pencil marks, and ink
all edges.
- Put card together and
fasten together with a brad.
- Stamp
sentiment on front.
Finished card
measures 5.25 in x 4.25 in.
Good
luck and have fun!!
Debbie
Weller
DebDuzScrappin.com
HOME
Back to Project
Tutorials
added 1/26/06
Debbie Weller DebDuzScrappin.com © 2005
2006 All rights reserved.
Do not duplicate or reprint in whole or in part without written permission.