Domino Wall Art
Level: Intermediate

Supplies:

16 Dominos

Gold ink: Brilliance

Copper ink: Brilliance

Black ink: Stazon

All rubberstamps: Club Scrap

Glue: Crafter’s Pick

Black acrylic paint

Mat board

Heat gun

Instructions:

Ink edges and the back (flat) side of 8 Dominoes in gold ink and 8 Dominos in copper ink. You will need to heat set each side as you ink it to set the ink and make it dry.
Once ink is dry, arrange your dominos as shown in diagram.
Choose your rubberstamps and stamp images and sentiments with black Stazon ink, let dry.
Ink top edges of each domino to sort of “frame” the words and images. You can do this either direct-to-pad or using a sponge for a softer look. Let dry.
Cut a piece of mat board just under 5in x 5in. Paint the center of the mat board black. Let dry.
Apply glue to mat board all around the edges (not in the very center where there will be no domino) and start adhering the dominos to the mat board. I also put a bit of glue on the edges of the dominoes to ensure they would hold together (especially on those few dominos that hang over the edge of the mat board).
Glue hanger to back of mat board, let dry.

Finished wall hanging is approximately 7in x 7in.

Good luck and have fun!!

Debbie Weller
DebDuzScrappin.com